Digital pics printed on 4x6 paper lose 1/4 inch from each horizontal edge. This is making the date on the bottom right corner not show on the print because it is cutting it off. I am using this program on pics taken with a Sony Cybershot point and shoot that has a 4:3 ratio.
How can I get the date to show on a 4x6 print?
Thank you!
Date not showing on 4x6 print
Hello,
I understand the problem. It can be solved by using the Crop filter
before the Date filter.
Please follow the steps:
1. In Step 2, select Add Filter > Transform > Crop
2. In the filter configuration window select "values in percents"
and the following: left=0, width=100, top=5, height=90.
3. Add the Date filter
I hope this solves your problem, please let me know if it doesn't.
Regards,
Cosmin Unguru
I understand the problem. It can be solved by using the Crop filter
before the Date filter.
Please follow the steps:
1. In Step 2, select Add Filter > Transform > Crop
2. In the filter configuration window select "values in percents"
and the following: left=0, width=100, top=5, height=90.
3. Add the Date filter
I hope this solves your problem, please let me know if it doesn't.
Regards,
Cosmin Unguru
Regards,
Mike Cosmin Unguru
Product Manager
Mike Cosmin Unguru
Product Manager
-
- Information
-
Who is online
Users browsing this forum: No registered users and 93 guests